Unidus Cooperation (HK) Limited

Products

Home > Products > Non-Ferrous Metal And Alloys > Nickel And Nickel Alloy Tube And Pipe > Monel Alloy 400 Tubing

Monel Alloy 400 Tubing

  • $10000
    ≥1
    Ton
Payment Type:
L/C,T/T
Incoterm:
FOB,CFR,CIF,EXW
Min. Order:
1 Ton
Transportation:
Ocean,Air
Port:
Shanghai
Share:
  • Product Description
Overview
Product Attributes

Model No.NA01

Place Of OriginChina

SpeciesNickel Pipe

Whether PowderNot Powder

Supply Ability & Additional Information

PackagingWooden case

Productivity500 ton /month

TransportationOcean,Air

Place of OriginChina

Supply Ability500 ton/month

CertificateTUV,BV,SGS

HS Code73043190

PortShanghai

Payment TypeL/C,T/T

IncotermFOB,CFR,CIF,EXW

Packaging & Delivery
Selling Units:
Ton
Package Type:
Wooden case

Monel Alloy 400

Monel Alloy 400 (NA13, N04400) is a nickel-copper alloy resistant to seawater and steam at high temperatures and widely used in the chemical, oil and marine industries. As a solution strengthened material, Monel Alloy 400 displays good strength, toughness and corrosion resistance at temperatures up to 400°C.

Monel Alloy 400 (NA13, 2.4360) is supplied by Columbia Metals in the cold worked condition as standard.

Monel Alloy 400 (NA13, 2.4360) is used for offshore and marine applications and for chemical processing.

Its corrosion resistance is particular strong in rapid flowing brackish water or seawater. Monel Alloy 400 exhibits good resistance to hydrofluoric and dilute non-oxidising acids, alkalis and salts. It resists corrosion by dry chlorine and hydrogen chloride and is not susceptible to stress corrosion cracking. Monel Alloy 400 (NA13) is readily cold formable and weldable.

Related Specifications of Monel Alloy 400

  • NA13
  • N04400
  • BS3076
  • ASTM B164
  • ASME SB164
  • NACE MR 0175
  • ISO 15156-3
  • 2.4360
  • 2.4361
  • NU 30 (FR)
  • NiCu30Fe

Nominal Composition of Monel Alloy 400

Ni 66.5%, Cu 31.5%

Mechanical Properties of Monel Alloy 400

Ultimate Tensile Strength (N/mm²) Proof Stress (N/mm²) Elongation (%) Hardness (HB)
480-600 170-415 20-35 35 HRC max

Microstructure

Alloy 400 is a solid-solution binary. As nickel and copper are mutually soluble in all proportions. It is a single-phase

alloy. It has a face-centered cubic lattice structure with a lattice parameter of 3. A

Characters

Alloy 400, with an excellent combination property, is a corrosion resistent alloy in a wide range of use and applications.

It has an excellent corrosion resistance in the media of hydrofluoric acid and fluorine and also a good corrosion resistance to hot strong alkali liquor. Besides it also resistant to corrosion in the neutral solution, water, sea water, air,organic compound etc. One important character of the alloy is that the s tress corrosion cracking normally doesn’t occur and it has a good machinability

Corrosion Resistance

Alloy 400 exhibits resistance to corrosion by many reducing media. It is also generally to attack by oxidizing media than

higher copper alloys. This versatility makes alloy 400 suitable for service in a variety of environment;

Alloy 400 is widely used in marine applications. While alloy 400 products exhibit very low corrosion rates in flowing seawater

Stagnant conditions have been shown to induce crevice and pitting corrosion. Alloy 400 is also resistant to stress corrosion cracking and pitting in most fresh and industrial water

Alloy 400 offers exceptional resistance to hydrofluoric acid in all concentrations up to the boiling point;

It is perhaps the most resistant of all commonly used engineering alloys Alloy 400 is also resistant to many forms of sulfuric and hydrochlorid acids under reducing

Applications

Monel 400 is a material in a variety of applications, and is applied in many industrial areas. tubing

  • Feed-water and steam generator in power plants
  • Brine heaters and evaporator bodies in seawater desalination plants
  • Pumps and values used in the manufacture of chlorinated hydrocarbons
  • Cladding for crude oil distillation columns
  • Splash-zone sheathing in offshore structures
  • Plants for uranium refining and isotope separation in the production of nuclear fuel
  • Propeller and pump shafts for seawater service.

Product Categories : Non-Ferrous Metal And Alloys > Nickel And Nickel Alloy Tube And Pipe

Email to this supplier
  • *Subject:
  • *To:
    Mr. Gary
  • *Email:
  • *Message:
    Your message must be between 20-8000 characters

Home > Products > Non-Ferrous Metal And Alloys > Nickel And Nickel Alloy Tube And Pipe > Monel Alloy 400 Tubing

Send Inquiry
*
*

Send Inquiry

Gary

Mr. Gary

Email:

Send Inquiry

Tel:+86-512-58577588

Fax:

Mobile Phone:+8613915729750Contact me with Whatsapp

Email:

Address:Yinhe Massion,Zhangjiagang City,Jiangsu Province, Suzhou, Jiangsu

Mobile Site

Home

Product

Whatsapp

About Us

Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send